This week for the
Skill Builder Sampler we are going to make a Drunkard's Path Block. I love these quarter circle units - there are so many ways to arrange them and make different designs. Today I am going to show you how to make your own Drunkard's Path templates and you can choose to make a block out of 6 inch, 4 inch or 3 inch Drunkards Path units.
(scroll down for instructions)
............
Edited (4/15): The Skill Builder Sampler will soon be available for purchase in book form! It has been renamed "You Can Quilt! Building Skills for Beginners" but covers the same skills with the easy, medium and challenging blocks and is a million times better than the original quilt along. It is perfect for the beginning quilter or the experienced quilter who wants to branch out and learn new skills. Find more information and pre-order a signed copy in my Etsy shop or pre-order on Amazon
. The Skill Builder Sampler tutorials will remain up until the book is released. After release, some will be removed.
............
Making the Template:
This is what we want to end up with: a template for the inner circle and a template for the outer section. The inner circle looks much larger than the outer section, but....
...if you slip it under the outer template so that the sides line up, you will see that they overlap by 1/2 an inch. That gives each piece a 1/4 inch seam allowance - perfect! It looks odd, but it works.
So let's get started. Decided what size you want your finished Drunkard's Path unit to be. Mine were 6 inches square. Add 1/2 inch to this measurement and cut out a square of card stock with those dimensions (6.5 inches). I outlined the seam allowances so you could see them, but that isn't necessary at all.
Next, decided where you want the pieces to meet and draw a line - this is the seam line
not the line for the template. I thought that a line 1.75 inches from the top and 4.75 inches from the bottom looked good. Place the compass in the corner of the square and mark the seam line.
Next measure down and up .25 inches from the seam line - these are the seam allowances for the templates. The outer section template needs a 1/4 inch seam allowance
below the seam line. The inner circle needs a 1/4 seam allowance
above the seam line.
Mark those lines with the compass. There is no way we can cut this one piece of paper to make both templates, so grab another piece of card stock to make the inner circle template.
You don't need to cut the card stock into a 6.5 inch square. To determine the size of the inner circle template, take the measurement from the bottom corner to the seam line and add .25. My seam line was 4.75 inches from the corner. Add a .25 inch seam allowance for this and I get 5 inches even. My inner circle template needs to have a radius of 5 inches.
Mark 5 inches on each side of the template and then mark the curve with the compass. This is the template for the inner circle. Cut it out.
Cut the original template along the line that is a quarter inch
below the seam line - this is the outer section template. The circle we are cutting out has a radius of .25
less than the seam line.
To recap:
- Decide what finished size unit you want and add .5 inches
- Cut out a square of card stock that size
- Decide where you want the seam line. Measure the distance from the corner of the unit to the seam line, let's call this measurement X (feel like you are back in school?).
- On a separate piece of card stock mark X + .25 on two sides of the paper. Join these line with the compass. This is the inner circle template. Cut it out.
- On the original piece of card stock, make marks .25 inches below the seam line. Join these marks with the compass. Cut along this lower line to make the outer section template.
You Can Do It! :)
Cutting:
Square up a corner of fabric, place the outer template on it and trace. Repeat and cut 4 outer sections.
Trace the inner template and cut out four pieces.
Sewing:
Pin one corner of the inner circle to the corner of the outer section as shown.
Pin the other end to the other corner and shape into a C shape.
Pin the center of the curve. You could mark the center, but that is a lot of work. ;) Not really, I just hate marking. To find the center without marking, line up the corner of the outer section and the corner of the inner circle as shown.
Look at the top side. The inner circle will peek out past the outer section. That is the center of the curve.
You want the lowest part of the outer section to line up with the highest part of the inner circle.
Wiggle the inner circle down by rubbing your fingers together until they are even.
Pin.
Work your way around the circle pinning very regularly.
Outer section on top, sew along the edge with a scant 1/4 inch seam.
Slow and steady and watch for puckers. Repeat for all 4 sections.
Play around with the arrangement. So many options.
But I chose this one. Sew the units in the top row and bottom row together.
Press seams to opposite sides.
Sew both rows together and press. You did it!
But...
Then you start thinking of all the cool arrangements you can make with more units and you decide to make a block with 3 inch finished units instead of 6 inch finished units.
Make the template (3.5 inches square) and cut out 16 inner and outer sections.
Sew as shown before - the curves are tighter and more challenging.
I found my seams got too scant and I needed to trim the edges of the units to square them up to 3.5 inches.
Play, play and play some more with the arrangement.
Then join the units in rows, and finally join the rows. Some of the seams get a bit bulky, so I ironed the bulky seams open.
There you go!
Two options for your Drunkard's Path block.
